Ústav fyzikálního inženýrství - obor Fyzikální inženýrství a nanotechnologie Ústav fyzikálního inženýrství - obor Fyzikální inženýrství a nanotechnologie
ÚFI 
ÚFI
Výzkum
Odbor mikromechaniky materiálů a technické akustiky
Publikace

   Přispěvky v mezinárodních časopisech


Vyhledávání

 

Vyhledávání osob

 

Klikněte na tlačítko Najdi ..

Mapa serveru

Odkazy:

OSA (the Optical Society) Student chapter of Czech Republic

ÚFI/Výzkum/Odbor mikromechaniky materiálů a technické akustiky /Publikace/Přispěvky v mezinárodních časopisech     

Příspěvky v mezinárodních časopisech

2013

  • POKLUDA, J.; Dislocation-based Model of Plasticity and Roughness-induced Crack Closure. International Journal of Fatigue. 2013. 46 (1). p. 35 - 40

  • SLÁMEČKA, K.; KIANICOVÁ, M.; POKLUDA, J.; Fractographically-aided Analysis of Fish-eye Crack Growth in Nitrided Steel. Journal of Theoretical and Applied Mechanics. 2013. 51 (2). p. 439 - 446

  • ČERNÝ, M.; ŘEHÁK, P.; UMENO, Y.; POKLUDA, J.; Stability and Strength of Covalent Crystals under Uniaxial and Triaxial Loading From First Principles. Journal of Physics: Condensed Matter. 2013. 25 (3). p. 035401-1 - 035401-8

  • ČERNÝ, M.; ŠESTÁK, P.; POKLUDA, J.; ŠOB, M.; Shear Instabilities in Perfect bcc Crystals during Simulated Tensile Tests. Physical Review B. 2013. 87 (0). p. 014117-1 - 014117-4

  • SLÁMEČKA, K.; POKLUDA, J.; KIANICOVÁ, M.; HORNÍKOVÁ, J.; OBRTLÍK, K.; Fatigue Life of Cast Inconel 713LC with/without Protective Diffusion Coating under Bending, Torsion and their Combination. Engineering Fracture Mechanics. 2013. (0). p. (v tisku) -

  • VOJTEK, T.; POKLUDA, J.; HOHENWARTER, A.; PIPPAN, R.; Three-dimensional Morphology of Fracture Surfaces Generated by Modes II and III Fatigue Loading in Ferrite and Austenite. Engineering Fracture Mechanics. 2013. 108 (0). p. 285 - 293

  • VOJTEK, T.; PIPPAN, R.; HOHENWARTER, A.; HOLÁŇ, L.; POKLUDA, J.; Near-threshold Propagation of Mode II and Mode III Fatigue Cracks in Ferrite and Austenite. Acta Materialia. 2013. 61 (12). p. 4625 - 4635

  • HORNÍKOVÁ, J.; ŽÁK, S.; ŠANDERA, P.; K-calibration of Special Specimens for Mode II, III and II+III Crack Growth. Engineering Fracture Mechanics. 2013. (0). p. v tisku -

  • VOJTEK, T.; POKLUDA, J.; ŠANDERA, P.; HORNÍKOVÁ, J.; HOHENWARTER, A.; PIPPAN, R.; Analysis of Fatigue Crack Propagation under Mixed Mode II+III in ARMCO Iron. International Journal of Fatigue. 2013. (0). p. zasláno -

    2012

  • HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J.; Comparison of Solutions of Stress Field based on Hertzian and Combined Numerical-Crystallographic Approaches beneath Nanoindenter. Key Engineering Materials. 2012. 488-489 (0). p. 395 - 398

  • LEJČEK, P.; POKLUDA, J.; ŠANDERA, P.; HORNÍKOVÁ, J.; JENKO, M.; Solute Segregation at 46.8°(111) Twist Grain Boundary of a Phosphorus Doped Fe-2.3%V Alloy. Surface Science. 2012. 606 (0). p. 258 - 262

  • UHNÁKOVÁ, A.; POKLUDA, J.; MACHOVÁ, A.; HORA, P.; 3D Atomistic Simulation of Fatigue Behavior of a Ductile Crack in bcc Iron loaded in mode II. Computational Materials Science. 2012. 61 (1). p. 12 - 19

  • ČERNÝ, M.; ŠESTÁK, P.; POKLUDA, J.; Strength of bcc Crystals under Combined Shear and Axial Loading from First Principles. Computational Materials Science. 2012. 55 (3). p. 337 - 343

  • ŘEHÁK, P.; ČERNÝ, M.; POKLUDA, J.; Dynamic Stability of fcc Crystals under Isotropic Loading from First Principles. Journal of Physics: Condensed Matter. 2012. 24 (21). p. 215403-1 - 215403-7

  • POKLUDA, J.; Theoretical Strength of Solids: Recent Results and Applications. Materials Science. 2012. 47 (5). p. 575 - 582

  • POKLUDA, J.; Theoretical Strength of Solids: A Bridge from Interatomic Bonds to Local Plasticity and Fracture. ESIS Newsletter. 2012. 50 (2). p. 21 - 26

  • ČERNÝ, M.; POKLUDA, J.; [100] Loading of Fcc Based Nanofibre Reinforced Composites. Acta Physica Polonica A. 2012. 122 (3). p. 505 - 508

  • HODIS, Z.; ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; Atlas of Materials Structures - Educational Software. Technológia vzdelávania. 2012. 20 (2). p. 1 - 6

    2011

  • HORNÍKOVÁ, J.; ŠANDERA, P.; PANTĚLEJEV, L.; POKLUDA, J.; Geometrical Shielding Produced by Intergranular Crack-tip Branching in Fe–V–P Alloy. Key Engineering Materials. 2011. 465 (0). p. 574 - 577

  • HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J.; Stress Intensity Factors for Surface Semi-elliptical Crack in Cylindrical Specimen under Combined Torsion and Axial Compression. Key Engineering Materials. 2011. 452-453 (0). p. 673 - 676

  • SLÁMEČKA, K.; POKLUDA, J.; BONAVENTUROVÁ, K.; ČELKO, L.; Microfractography of Fish-Eye Fractures in Nitrided Steel. Chemické listy. 2011. 105 (17). p. s721 - s724

  • ČERNÝ, M.; POKLUDA, J.; First Principles Study of Ideal Composites Reinforced by Coherent Nano-Fibres. Key Engineering Materials. 2011. 465 (0). p. 73 - 76

  • ŠESTÁK, P.; ČERNÝ, M.; POKLUDA, J.; Stabilizing Effect of (100) Compound Twinning in NiTi Martensite. Key Engineering Materials. 2011. 465 (0). p. 81 - 84

  • ŘEHÁK, P.; ČERNÝ, M.; POKLUDA, J.; The [100] Compressive Strength of Perfect Cubic Crystals under Superimposed Biaxial Stresses. Key Engineering Materials. 2011. 465 (0). p. 183 - 186

  • SLÁMEČKA, K.; KIANICOVÁ, M.; POKLUDA, J.; Fractography of Fish-eye Cracks in Nitride Steel Specimens: Assessment of Residual Fatigue Life. Zeszyty Naukowe. Politechnika Opolska. Mechanika. 2011. z.98 (0). p. -

  • ČERNÝ, M.; POKLUDA, J.; The Theoretical Strength of fcc Crystals under Multiaxial Loading. Computational Materials Science. 2011. 50 (7). p. 2257 - 2261

  • ŠESTÁK, P.; ČERNÝ, M.; POKLUDA, J.; Can Twinning Stabilize B19′ Structure in NiTi Martensite?. Intermetallics. 2011. 19 (10). p. 1567 - 1572

  • UHNÁKOVÁ, A.; POKLUDA, J.; MACHOVÁ, A.; HORA, P.; 3D Atomistic Simulation of Fatigue Behaviour of Cracked Single Crystal of bcc Iron Loaded in Mode III. International Journal of Fatigue. 2011. 33 (0). p. 1564 - 1573

  • ŠANDERA, P.; Preface. Key Engineering Materials. 2011. 465 (0). p. 1 - 1

  • KLAKURKOVÁ, L.; ČELKO, L.; SLÁMEČKA, K.; DOLEžAL, P.; ŠVEJCAR, J.; Influence of Temperature on Microhardness of Aluminium-Based Composites Produced by Controlled Hypereutectic Reaction in Al-Ni System. Chemické listy. 2011. 105 (0). p. s820 - s821

    2010

  • ŠANDERA, P.; POKLUDA, J.; HORNÍKOVÁ, J.; VLACH, B.; LEJČEK, P.; JENKO, M.; Fracture of Polycrystalline Fe-2.3%V-0.12%P Alloy. Engineering Fracture Mechanics . 2010. 77 (0). p. 385 - 392

  • SLÁMEČKA, K.; POKLUDA, J.; KIANICOVÁ, M.; MAJOR, Š.; DVOŘÁK, I.; Quantitative Fractography of Fish-Eye Crack Formation under Bending-Torsion Fatigue. International Journal of Fatigue . 2010. 32 (6). p. 921 - 928

  • HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J.; Linear-Elastic and Elastoplastic Mode II and III Crack Tip Stress-Strain Fields in Cylindrical Specimens with Circumferential Crack. Key Engineering Materials. 2010. 417-418 (0). p. 321 - 324

  • DLOUHÝ, I.; ŠANDERA, P.; Editorial. Engineering Failure Analysis. 2010. 17 (3). p. 595 - 595

  • ČERNÝ, M.; ŠESTÁK, P.; POKLUDA, J.; Influence of Superimposed Normal Stress on Shear Strength of Perfect bcc Crystals. Computational Materials Science. 2010. 47 (4). p. 907 - 910

  • POKLUDA, J.; Special Issue Microstructurally Based Fracture Mechanics Foreword. Engineering Fracture Mechanics. 2010. 77 (2). p. 183 - 183

  • ČERNÝ, M.; POKLUDA, J.; The Theoretical Shear Strength of fcc Crystals under Superimposed Triaxial Stress. Acta Materialia. 2010. 58 (0). p. 3117 - 3123

  • HOLÁŇ, L.; POKLUDA, J.; SLÁMEČKA, K.; Local Aspects of Shear-mode Crack Propagation in Austenitic Steel. Chemické listy. 2010. 104 (15). p. 314 - 317

  • ČELKO, L.; KLAKURKOVÁ, L.; SLÁMEČKA, K.; MAN, O.; ŠVEJCAR, J.; Atlas of Materials Structures. Acta Metallurgica Slovaca. 2010. 16 (1). p. 123 - 128

  • POKLUDA, J.; SLÁMEČKA, K.; ŠANDERA, P.; Mechanism of Factory-Roof Formation. Engineering Fracture Mechanics. 2010. 77 (0). p. 1763 - 1771

  • POKLUDA, J.; KIANICOVÁ, M.; Assessment of Performance Capability of Turbine Blades with Protective Coatings after Overheating Events. Engineering Failure Analysis. 2010. 17 (0). p. 1389 - 1396

  • ČERNÝ, M.; POKLUDA, J.; Ideal Tensile Strength of Cubic Crystals under Superimposed Transverse Biaxial Stresses from First Principles. Physical Review B. 2010. 82 (17). p. 174106-1 - 174106-5

  • UMENO, Y.; ČERNÝ, M.; Erratum: Effect of normal stress on the ideal shear strength in covalent crystals [Phys. Rev. B 77, 100101(R) (2008)]. Physical Review B - Condensed Matter and Materials Physics. 2010. 82 (6). p. 069902-1 - 069902-1

  • ČERNÝ, M.; POKLUDA, J.; Elasticity and Strength of Nano-Fibre Reinforced Composites from First Principles. World Journal of Engineering. 2010. 7 (6). p. 364 - 365

    2009

  • ČERNÝ, M.; POKLUDA, J.; The Theoretical Tensile Strength of fcc Crystals Predicted from Shear Strength Calculations. Journal of Physics: Condensed Matter. 2009. 21 (14). p. 145406-1 - 145406-5

  • POKLUDA, J.; Minutes of the TC2 (Micromechanisms) ESIS meeting: Leoben, April 20, 2009. Engineering Fracture Mechanics. 2009. 76 (0). p. I - II

    2008

  • ŠESTÁK, P.; ČERNÝ, M.; POKLUDA, J.; Influence of Normal Stress on Shear Strength along <111>{110} and <111>{112} Deformation Paths in B2 NiTi Alloy from First Principles. Materials Science & Engineering A. 2008. 481-482 (0). p. 247 - 249

  • ČERNÝ, M.; POKLUDA, J.; Influence of Normal Stress on Theoretical Shear Strength of fcc Metals. Materials Science and Engineering A. 2008. 483-484 (1). p. 692 - 694

  • SLÁMEČKA, K.; POKLUDA, J.; PONÍžIL, P.; MAJOR, Š.; ŠANDERA, P.; On the Topography of Fracture Surfaces in Bending–torsion Fatigue. Engineering Fracture Mechanics. 2008. 75 (0). p. 760 - 767

  • POKLUDA, J.; TRATTNIG, G.; MARTINSCHITZ, C.; PIPPAN, R.; Straightforward Comparison of Fatigue Crack Growth under Modes II and III. International Journal of Fatigue. 2008. 30 (8). p. 1498 - 1506

  • ČERNÝ, M.; POKLUDA, J.; Tensile Strength of Perfect Cubic Crystals under Superimposed Transverse Plain Stress. Materials Science Forum. 2008. 567-568 (0). p. 73 - 76

  • JANOVEC, J.; POKLUDA, J.; LEJČEK, P.; Influence of Phosphorus Grain Boundary Segregation on Fracture Behaviour of Iron-base Alloy. Materials Science Forum. 2008. 567-568 (0). p. 33 - 38

  • KIANICOVÁ, M.; POKLUDA, J.; Degradation of Protective Al-Si Coatings during Exploatation of Gas Turbine Blades. Materials Science Forum. 2008. 567-568 (0). p. 309 - 312

  • POKLUDA, J.; PODRÁBSKÝ, T.; SLÁMEČKA, K.; POSPÍšILOVÁ, S.; CHAI, G.; Microstructure-aided Analysis of Fatigue Thresholds in Duplex Stainless Steel. Materials Science Forum. 2008. 567-568 (0). p. 101 - 104

  • PONÍžIL, P.; PAVLÍNEK, V.; KITANO, T.; DŘÍMAL, T.; Image Analysis of Electrorheological Samples. WSEAS Ttransactions on Signal Processing. 2008. (0). p. -

  • PONÍžIL, P.; SAXL, I.; PROCHÁZKA, J.; Classification and Computer Simulation of 2D Tessellations. Materials Science Forum. 2008. 567-568 (0). p. 281 - 284

  • PROCHÁZKA, J.; PONÍžIL, P.; SAXL, I.; Grain Size Estimation in Anisotropic Materials. Materials Science Forum. 2008. 567-568 (0). p. 285 - 288

  • MAJOR, Š.; PAPUGA, J.; HORNÍKOVÁ, J.; POKLUDA, J.; Comparison of Fatigue Criteria for Combined Bending-torsion Loading of Nitrided and Virgin Specimens. Strength of Materials. 2008. 40 (1). p. 73 - 76

  • ŠESTÁK, P.; ČERNÝ, M.; POKLUDA, J.; Elastic Properties of B19’ Structure of NiTi Alloy under Uniaxial and Hydrostatic Loading from First Principles. Strength of Materials. 2008. 40 (1). p. 12 - 15

  • HORNÍKOVÁ, J.; ŠANDERA, P.; ČERNÝ, M.; POKLUDA, J.; Multiscale Modelling of Nanoindentation Test in Copper Crystal. Engineering Fracture Mechanics. 2008. 75 (0). p. 3755 - 3762

  • UMENO, Y.; ČERNÝ, M.; Effect of Normal Stress on the Ideal Shear Strength in Covalent Crystals. Physical Review B. 2008. 77 (10). p. 100101 -

  • KOTOUL, M.; POKLUDA, J.; ŠANDERA, P.; DLOUHÝ, I.; CHLUP, Z.; BOCCACCINI, A.; Toughening Effects Quantifications in Glass Matrix Composite Reinforced by Alumina Platelets. Acta Materialia. 2008. 56 (0). p. 2908 - 2918

  • HOLÁŇ, L.; HOHENWARTER, A.; SLÁMEČKA, K.; PIPPAN, R.; POKLUDA, J.; Experimental Evaluation of Fatigue Long Crack Propagation under Remote Shear Loading Modes II and III. Materials Science and Technology. 2008. 8 (4). p. 55 - 59

  • ŠESTÁK, P.; ČERNÝ, M.; POKLUDA, J.; The Elastic Constants of Austenitic and Martensitic Phases of NiTi Shape Memory Alloy. Materials Science and Technology. 2008. 8 (4). p. 120 - 124

  • POKLUDA, J.; KONDO, Y.; SLÁMEČKA, K.; ŠANDERA, P.; HORNÍKOVÁ, J.; Assessment of Extrinsic Crack Tip Shielding in Austenitic Steel near Fatigue Threshold. Key Engineering Materials. 2008. 385-387 (0). p. 49 - 52

  • ČERNÝ, M.; POKLUDA, J.; Influence of Superimposed Normal Stress on the <112>{111} Shear Strength in Perfect fcc Metals. Computational Materials Science. 2008. 44 (1). p. 127 - 130

  • POKLUDA, J.; PIPPAN, R.; Microstructuraly Aided Fracture Mechanics - Foreword. Engineering Fracture Mechanics. 2008. 75 (0). p. 3611 - 3611

  • POKLUDA, J.; Foreword. Strength of Materials. 2008. 40 (1). p. 1 - 1

    2007

  • HORNÍKOVÁ, J.; ČERNÝ, M.; ŠANDERA, P.; POKLUDA, J.; Onset of Microplasticity in Copper Crystal during Nanoindentation. Key Engineering Materials. 2007. 348-349 (0). p. 801 - 804

  • SLÁMEČKA, K.; PONÍžIL, P.; POKLUDA, J.; Quantitative Fractography in Bending-Torsion Fatigue. Materials Science and Engineering A. 2007. 462 (0). p. 359 - 362

  • POKLUDA, J.; PIPPAN, R.; Analysis of Roughness-induced Crack Closure based on Asymmetric Crack-wake Plasticity and Size Ratio Effect. Materials Science and Engineering A. 2007. 462 (0). p. 355 - 358

  • ČERNÝ, M.; Elastic Stability of Magnetic Crystals under Isotropic Compression and Tension. Materials Science and Engineering A. 2007. 462 (0). p. 432 - 435

  • PILCH, J.; POKLUDA, J.; FLORIAN, Z.; HELLER, L.; ŠANDERA, P.; HORNÍKOVÁ, J.; Thermomechanical Properties of Nitinol Wires for Stewart Platform. AT&P Journal PLUS. 2007. 2007 (1). p. 63 - 66

  • ŠESTÁK, P.; ČERNÝ, M.; POKLUDA, J.; Ab-initio modeling deformations of NiTi. AT&P Journal PLUS. 2007. 2007 (1). p. 67 - 69

  • JANOVEC, J.; JENKO, M.; LEJČEK, P.; POKLUDA, J.; Grain Boundary Segregation of Phosphorus and Silicon in Polycrystals and Bicrystals of the Fe–2.6Si–0.055P Alloy. Materials Science and Engineering A. 2007. 462 (0). p. 441 - 445

  • ČERNÝ, M.; POKLUDA, J.; Influence of Superimposed Biaxial Stress on the Tensile Strength of Perfect Crystals from First Principles. Physical Review B. 2007. 76 (2). p. 024115-1 - 024115-5

  • HORNÍKOVÁ, J.; BURšÍKOVÁ, V.; ŠANDERA, P.; ČERNÝ, M.; POKLUDA, J.; Multiscale Modelling of Nanoindentation Test in Nickel Crystal. Acta Metallurgica Slovaca. 2007. 13 (6). p. 65 - 69

  • PONÍžIL, P.; PAVLÍNEK, V.; KITANO, T.; DŘÍMAL, T.; Image Analysis of Electrorheological Flow Patterns. International Journal of Mathematical Models and Methods in Applied Sciences. 2007. 1 (4). p. 239 - 242

    2006

  • JANOVEC, J.; LEJ?EK, P.; POKLUDA, J.; JENKO, M.; Effects of Grain Size and Grain Boundary Segregation on Fracture Behaviour of a Polycrystalline Fe-2.65Si-0.028P Alloy. Kovové materiály. 2006. 44 (0). p. 81 - 87

  • JANOVEC, J.; POKLUDA, J.; JENKO, M.; LEJ?EK, P.; VLACH, B.; HORNÍKOVÁ, J.; Influence of Phosphorus Enrichment at Grain Boundaries on Energy of Intergranular Fracture in Fe-Si-P Alloys. Surface and Interface Analysis. 2006. 38 (4). p. 401 - 405

  • HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J.; Computation of Effective Fatigue Thresholds Based on a New Concept of Crack Closure. Key Engineering Materials. 2006. 324-325 (0). p. 803 - 806

    2005

  • ?ERNÝ, M., POKLUDA, J. Elasticity and stability of Fe-P ordered systems from first principles. Materials Science Forum. 2005. 482(3). p. 135 – 272 Scientific

  • JANOVEC, J.; JENKO, M.; POKLUDA, J.; VLACH, B.; LEJ?EK, P.; SVOBODA, M.; ŠANDERA, P. Effect of Grain Boundary Segregation on Mechanical Properties of P-Doped Fe-Si Base Alloys. Materials Science Forum. 2005. 482(0). p. 191 - 194 Scientific

  • ŠOB, M.; POKLUDA, J.; ?ERNÝ, M.; ŠANDERA, P.; VÍTEK, V. Theoretical Strength of Metals and Intermetallics from First Principles. Materials Science Forum. 2005. 482(0). p. 135 - 138 Scientific

  • POKLUDA, J.; ŠANDERA, P.; HORNÍKOVÁ, J. Analysis of Roughness-Induced Crack-Tip Shielding in Terms of Size Ratio Effect. Journal of ASTM International. 2005. 2(4). p. 1 - 15 ASTM

  • SLÁME?KA, K.; POKLUDA, J. Analysis of Fracture Morphology and Local Loading Modes in Torsional Fatigue. Materials Science Forum. 2005. 482(0). p. 263 – 266 Scientific

  • HORNÍKOVÁ, J.; ŠANDERA, P.; POKLUDA, J. On the Crack Tip Shielding in Particle Reinforced Composites. Materials Science Forum. 2005. 482(0). p. 311 - 314 Scientific

  • POKLUDA, J.; PIPPAN, R. Can a Pure Mode III Fatigue Loading Contribute to Crack Propagation in Metallic Materials. Fatigue & Fracture of Engineering Materials & Structures. 2005. 28(0). p. 179 – 186 Blackwell

  • ?ERNÝ, M.; BOYER, R.; ŠOB, M.; YIP, S. Higher-Energy Structures and Stability of Cu and Al Crystals Along Displacive Transformation Paths. Journal of Computer-Aided Materials Design. 2005. 12(12). p. 161 – 173 Springer

    2004

  • ?ERNÝ, M., POKLUDA, J., ŠANDERA, P. Ab initio analysis of theoretical isotropic strength and elasticity of nickel aluminide compounds. Materials Science and Engineering A. 2004. 387-389C(12). p. 923 - 925 Sciencedirect

  • ?ERNÝ, M., POKLUDA, J. Stability of FCC crystals under hydrostatic loading. Journal of Alloys and Compounds. 2004. 378(1-2). p. 159 – 162 Sciencedirect

  • POKLUDA, J., ?ERNÝ, M., ŠANDERA, P., ŠOB, M. Calculations of Theoretical Strength: State of the Art and History. Journal of Computer-Aided Materials Design. 2004. 11(1). p. 1 - 28 Springer

  • POKLUDA, J. Theoretical Strength of Solids. Communications. 2004. 5(2). p. 5 - 11

  • ?ERNÝ, M., ŠOB, M., POKLUDA, J., ŠANDERA, P. Ab initio calculations of ideal tensile strength and mechanical stability in copper. Journal of Physics: Condensed Matter. 2004. 16(2). p. 1045 - 1052 IOP

  • POKLUDA, J. ŠANDERA, P. HORNÍKOVÁ, J. Statistical Approach to Roughness-Induced Shielding Effects. Fatigue & Fracture of Engineering Materials & Structures. 2004. 27(2). p. 141 – 157 Blackwell

    2003

  • ?ERNÝ, M.; POKLUDA, J.; ŠOB, M.; FRIÁK, M.; ŠANDERA, P. Ab initio calculations of elastic and magnetic properties of Fe, Co, Ni,and Cr crystals under isotropic deformation. Physical Review B. 2003. 67(1). p. 035116-1 (8 p.) APS

    2002

    2001

  • SELLERI, S., PETRÁ?EK, J. Modal analysis of rib waveguide through finite element and mode matching methods. Optical and Quantum Electronics. 2001. 2001(33). p. 373 - 386 Springer

    2000

    1999

    1998

    1997

    1996

  • © 2003 designed by RAW4U

    PDVisual    Vysoké učení technické v Brně, Fakulta strojního inženýrství     Admin    Mapa serveru